Basic Operation; Inserting And Formatting A Disc - Sony RDR-GX210 Operating Instructions Manual

Basic Operation

Inserting and Formatting a
Disc
+
RW - RW - RW
VR
Video
When you first insert a new disc, the recorder will
ask you to format the disc. Follow the steps below
to format the disc. You can also reformat a
DVD+RW or DVD-RW to create a blank disc.
Z
1 2
4 5
7 8
0
SET UP
1
Turn on the TV.
2
Press / .
& 1
The recorder turns on.
3
Switch the input selector on your TV so that
the signal from the recorder appears on the
TV screen.
4
Slide the TV/DVD switch to DVD.
5
Press Z (open/close), and place a disc on
the disc tray.
Labelled side facing up
+ R - R
TV/DVD switch
"/1
3
6
9
</M/m/,,
ENTER
6
Press Z (open/close) to close the disc
tray.
After "LOADING" disappears from the front
panel display, the display asks for
confirmation.
7
Press < to select [OK] and press ENTER.
The recorder starts formatting the disc.
The display shows the approximate time
required.
8
Press ENTER when [OK] appears.
• For a DVD-RW, the recorder automatically
formats in VR mode. To format in Video
mode, see "Reformatting a disc" below.
z Hint
For a formatted disc, you can use the disc after
"LOADING" disappears from the front panel display in
step 6 above.
Reformatting a disc
+
RW - RW - RW
VR
Video
You can erase all contents of a disc to create a
blank disc. To format a new DVD-RW in Video
mode, reformat the disc.
1
Insert a disc.
2
Press SET UP to turn on the Setup Display.
3
Select [Disc Info] and press ,.
4
Select [Format DVD] and press ,.
Disc Info
Format DVD
Finalize
Disc Name
Protect
5
While [Start] is selected, press ENTER.
The display asks for confirmation.
• For DVD-RWs, select a recording format
(VR mode or Video mode) and press
ENTER.
6
Select [OK] and press ENTER.
Formatting starts.
Start
27