Table of Contents
Advertisement
Audio Settings
The [Audio] Setup allows you to adjust the sound
according to the playback and connection
conditions.
Select
[Audio] in the Setup Display. To use the
display, see "Using the Setup Displays" (page 69).
The default settings are underlined.
Audio
Dolby Digital
DTS
MPEG
Sampling Freq.
Audio DRC
Vocal
[Dolby Digital] (DVDs only)
Selects the type of Dolby Digital signal when
using the DIGITAL OUT (OPTICAL or
COAXIAL) jack.
[ D-PCM ]
Select this when the recorder is
connected to an audio component
without a built-in Dolby Digital
decoder.
[ Dolby
Select this when the recorder is
Digital ]
connected to an audio component
with a built-in Dolby Digital
decoder.
[DTS] (DVD VIDEO only)
Selects whether or not to output DTS signals when
using the DIGITAL OUT (OPTICAL or
COAXIAL) jack.
[ Off ]
Select this when the recorder is
connected to an audio component
without a built-in DTS decoder.
[ On ]
Select this when the recorder is
connected to an audio component
with a built-in DTS decoder.
[MPEG] (DVD VIDEO only)
Selects the type of MPEG audio signal when using
the DIGITAL OUT (OPTICAL or COAXIAL)
jack.
D-PCM
Dolby Digital
[Sampling Freq.] (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
[ PCM ]
Select this when the recorder is
connected to an audio component
without a built-in MPEG decoder.
If you play MPEG audio sound
tracks, the recorder outputs stereo
signals via the DIGITAL OUT
(OPTICAL or COAXIAL) jack.
[ Bitstream ]
Select this when the recorder is
connected to an audio component
with a built-in MPEG decoder.
[ 48kHz ]
The audio signals of DVD
VIDEOs are always converted to
48 kHz/16 bit.
[ 96kHz ]
All types of signals, including
96 kHz/24 bit, are output in their
original format.
,continued
75
Hide quick links:
Advertisement
Table of Contents
