Table of Contents
Advertisement
2
Press ENTER while [Setting] is selected.
The Channel List menu appears.
PR
01
02
03
04
05
PR-01
NICAM
06
07
08
09
10
11
3
Press M/m to select the programme position
you want to set, and press ENTER.
PR
01
02
03
04
05
PR-01
NICAM
06
Channel Settings
07
Station Name
08
Move
09
Erase
10
Decoder On/Off
NICAM/Standard
11
4
Select an option from the sub-menu, and press
ENTER.
[Channel Settings]: Sets the channel
manually. See "To set the channels manually"
below.
[Station Name]: Changes the station name.
The display for entering characters appears.
To enter characters, see page 32.
[Move]: Sorts the programme positions on the
Channel List. Press M/m to move the selected
programme position to a new location.
[Erase]: Disables a programme position you
do not need.
[Decoder On/Off]: Sets the channels for the
decoder. You need this setting to watch or
record PAY-TV/Canal Plus programmes.
Press ENTER so [Decoder] appears on the
display. Press ENTER again to turn off the
setting.
[NICAM/Standard]: Sets the channels for the
NICAM broadcast. Normally, [NICAM] is lit
on the display. If the sound from NICAM
broadcast is not clear, press ENTER so
[NICAM] disappears.
Note
Be sure to correctly select the programme position you
want to disable. If you disable the wrong programme
position by mistake, you need to reset that channel
manually.
Ch.
Fine
Station
C 12
0
AWB1
C 23
0
AWB2
C 7
0
DTV
C 27
0
CH2
C 17
0
LHTV
C 33
0
CSN
C 34
0
PTGLE
C 47
0
PSG
C 10
0
TV2
Ch.
Fine
Station
C 12
0
AWB1
C 23
0
AWB2
C 7
0
DTV
C 27
0
CH2
C 17
0
LHTV
C 33
0
CSN
C 34
0
PTGLE
C 47
0
PSG
C 10
0
TV2
◆To set the channels manually
When you select [Channel Settings] in step 4
above, the display for setting channels appears.
1
Press </, to select the item and press M/m
to change the setting.
[PR] indicates the selected programme
position.
PR Seek
Ch.
C 2
1
[Seek]: Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
[Ch.]: Changes the channel number.
[Fine]: Fine tunes the channel to obtain a
clearer picture.
[PAL/SECAM]: This appears only for
selected models. For customers in France,
switch channels from PAL to SECAM if the
reception is poor.
2
Select [OK] and press ENTER.
The setting is stored and the display returns to
the Channel List.
To preset other channels, follow from step 3
of the Channel List setting (page 70).
◆Receivable channels
TV system
Channel coverage
BG (West European
E2 - E12 VHF
Countries, except
Italia A – H VHF
those listed below)
Colour system: PAL
E21 – E69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
DK (East European
R1 – R12 VHF
Countries)
R21 – R69 UHF
Colour system: PAL
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
Fine
OK
0
,continued
71
Hide quick links:
Advertisement
Table of Contents
