Settings For The Speakers (Speaker Setup) - Sony DVP-NS90V Operating Instructions Manual

Cd/dvd player
Hide thumbs Also See for DVP-NS90V:
Table of Contents

Advertisement

Note
If the HDMI OUT jack is connected to equipment
not compatible with DOLBY DIGITAL signals, the
"D-PCM" signals will be automatically output even
when you select "DOLBY DIGITAL."
DTS
Select the type of DTS audio signals.
D-PCM
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
DTS
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
Note
If the HDMI OUT jack is connected to equipment
not compatible with DTS signals, the "D-PCM"
signals will be automatically output even when you
select "DTS."
48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
Notes
• The analogue audio signals from the LINE OUT
L/R (AUDIO) jacks and 5.1CH OUTPUT jacks
are not affected by this setting and keep their
original sampling frequency level.
• If the HDMI OUT jack is connected to equipment
not compatible with 96 kHz/24 bit signals,
48 kHz/16 bit PCM will be automatically output
even when you select "96kHz/24bit."
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume of the speakers to the same
level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
23).
You can create two different Speaker Setup
settings, one for Super Audio CDs and one for
all other types of discs.
1
Follow steps 1 through 4 of "Using
the Setup Display" (page 68) to
select "SPEAKER SETUP" in the
Setup display.
SPEAKER SETUP
DVD:
SUPER AUDIO CD:
2
Select "DVD" or "SUPER AUDIO
CD" using X/x, then press ENTER.
Example: "DVD"
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT) :
LEVEL(REAR) :
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
T
t
3
Set the following items in the
order that they are explained
below.
The default settings are underlined.
OFF
LARGE
LARGE
LARGE(REAR)
YES
th
ENTER
,continued
75

Advertisement

Table of Contents
loading

Table of Contents