Sony DVP-NS90V Operating Instructions Manual page 26

6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
YC C /RGB (HDMI):
B R
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 70)
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 70)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
If you did not connect an AV amplifier
(receiver), select "NO," then go to step
19.
If you connected an AV amplifier
(receiver) using just an audio cord, select
"YES: LINE OUTPUT L/R (AUDIO),"
then go to step 19.
If you connected an AV amplifier
(receiver) using a digital coaxial or
optical/HDMI cord, select "YES:
DIGITAL OUTPUT."
26
4:3 LETTER BOX
4:3 PAN SCAN
JACKET PICTURE
:
(COMPONENT OUT)
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
Setup Display for "DOLBY DIGITAL"
appears.
If you connected an AV amplifier
(receiver) using an audio cord, select
"YES: DIGITAL & 5.1CH OUTPUT."
The Setup Display for "DOLBY
16:9
DIGITAL" appears.
16:9
10
Press X/x to select the type of
Dolby Digital signal you wish to
ON
OFF
FULL send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
11
Press ENTER.
"DTS" is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select "DTS." Otherwise,
select "D-PCM."
13
Press ENTER.
in step 9
• Quick Setup is finished and
connections are complete.
selected in step 9
• The Setup Display for "SPEAKER
SETUP" appears.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
When "DIGITAL OUTPUT" is selected
When "DIGITAL & 5.1CH OUTPUT" is
OFF
STANDARD
SHARP
ON
D-PCM
D-PCM
DOLBY DIGITAL
OFF
STANDARD
SHARP
ON
D-PCM
D-PCM
D-PCM
DTS