Adjusting The Delay Between The Picture And Sound (Av Sync) - Sony DVP-NS90V Operating Instructions Manual

Adjusting the Delay
Between the Picture and
Sound
(AV SYNC)
When the sound does not match the pictures
on the screen, you can adjust the delay
between the picture and sound.
CLEAR
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
SYNC), then press ENTER.
The following display appears.
0 ms
SET
3
Press x to select "SET c", then
press ENTER.
The "AV SYNC" adjustment bar
appears.
4
5
To reset the "AV SYNC" setting
ENTER
Press CLEAR in step 4.
Notes
DISPLAY
• This function is not effective if you use the
DIGITAL OUT (OPTICAL or COAXIAL) jack,
and set "DOLBY DIGITAL" or "DTS" in
AUDIO SETUP to "DOLBY DIGITAL" or
"DTS" respectively (page 74).
• This function is not effective if you connect a
Dolby Digital or DTS-compliant device via the
HDMI OUT jack, and set "DOLBY DIGITAL" or
"DTS" in AUDIO SETUP to "DOLBY
DIGITAL" or "DTS" respectively (page 74).
(AV
STOP
DVD VIDEO
AV SYNC
Press c repeatedly to adjust the
delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
Press ENTER.
The selected setting takes effect.
0ms
55