Table of Contents
Advertisement
To return to the default setting
Select the item, then press CLEAR. Note that
only the "SIZE" setting does not return to the
default setting.
SIZE
Selects the size of the speakers.
• FRONT
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
• CENTER
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
NONE
Select this if you do not connect
a center speaker.
• REAR
LARGE
(REAR/SIDE): Normally select
this position. Select according
to the rear speaker position*.
SMALL
(REAR/SIDE): Select this
when the sound distorts or the
surround effects are difficult to
hear. Select according to the
rear speaker position*.
NONE
Select this if you do not connect
rear speakers.
* Rear speaker position
Correctly specify the location of the rear speakers to
enjoy the surround effect.
• Set to "SIDE," if the location of the rear speakers
corresponds to section A below.
• Set to "REAR," if the location of the rear speakers
corresponds to section B below.
This setting affects only "VIRTUAL REAR
SHIFT," "VIRTUAL MULTI REAR," and
"VIRTUAL MULTI DIMENSION" mode
(page 48). This setting does not affect the Super
Audio CD Multi audio signals.
76
90
45
20
• SUBWOOFER
YES
Select this if you connect a
subwoofer to output the LFE
(Low Frequency Effect) signals
from the subwoofer.
NONE
Select this if you do not connect
a subwoofer.
Notes
• The cut off frequency for the subwoofer is fixed at
120 Hz.
• If your speakers are too small to reproduce low
bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to "SMALL," the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
• Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components
to the front speakers.
DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
"FRONT" first (A). Then adjust the values in
"CENTER" (center speaker B), and
"REAR" (rear speaker C) , and
"SUBWOOFER" (D) to reflect the actual
distance to your center speaker, rear speakers,
and subwoofer.
B
A
(4~50 ft/
1.2~
15.2m)
C
D
A
(4~50 ft/
1.2~
15.2m)
C
Hide quick links:
Advertisement
Table of Contents
