Settings For The Speakers (Speaker Setup) - Sony DVP-NS92V Operating Instructions Manual

Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume of the speakers to the same
level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
21).
You can create two different Speaker Setup
settings, one for Super Audio CDs and one for
all other types of discs.
1
Follow steps 1 through 4 of "Using
the Setup Display" (page 72) to
select "SPEAKER SETUP" in the
Setup display.
SPEAKER SETUP
2
Select "DVD" or "SUPER AUDIO
CD" using X/x, then press ENTER.
Example: "DVD"
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT) :
LEVEL(REAR) :
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
T t
80
DVD:
SUPER AUDIO CD:
OFF
LARGE
LARGE
LARGE(REAR)
th
ENTER
3
Set the following items in the
order that they are explained
below.
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that
only the "SIZE" setting does not return to the
default setting.
SIZE
Selects the size of the speakers.
• FRONT
LARGE
SMALL
• CENTER
LARGE
SMALL
NONE
• REAR
LARGE
SMALL
NONE
* Rear speaker position
Correctly specify the location of the rear speakers to
YES
enjoy the surround effect.
• Set to "SIDE," if the location of the rear speakers
corresponds to section A below.
• Set to "REAR," if the location of the rear speakers
corresponds to section B below.
This setting affects only "VIRTUAL REAR
SHIFT," "VIRTUAL MULTI REAR," and
"VIRTUAL MULTI DIMENSION" mode
(page 48). This setting does not affect the Super
Audio CD Multi audio signals.
Normally select this position.
Select this when the speaker
cannot reproduce adequate bass
frequencies.
Normally select this position.
Select this when the speaker
cannot reproduce adequate bass
frequencies.
Select this if you do not connect
a center speaker.
(REAR/SIDE): Normally select
this position. Select according
to the rear speaker position*.
(REAR/SIDE): Select this
when the sound distorts or the
surround effects are difficult to
hear. Select according to the
rear speaker position*.
Select this if you do not connect
rear speakers.