Wireless Authentication Tab - Setting The Wireless Authentication; Pppoe Tab - Setting Of Pppoe Connection - Sony SNC-RZ25N User Manual

Wireless authentication Tab -
Setting the Wireless Authentication
Set the authentication necessary for the wireless
connection.
SSID
Type the ID to identify the wireless network you want to
access using up to 32 ASCII characters (alphanumeric).
For your security, be sure to change the factory setting.
WEP
Select On when you use the WEP (Wired Equivalent
Privacy) keys, or Off when you do not use it.
The WEP key data settings are valid only when the WEP
menu is set to On.
WEP key data
Specify up to 4 WEP keys. The length of a WEP key is
40 or 104 bit. A 104-bit WEP key has a higher security
level than a 40-bit key. You can type the WEP key either
in hexadecimal numbers (0 to 9 and A to F) or ASCII
characters (alphanumeric).
When the Type menu is set to Infrastructure mode, the
WEP key should be the same as that of the access point.
When the Type menu is set to Ad hoc mode, the WEP
key should be the same as that of the communication
client.
Notes
• When you remove the wireless LAN card, be sure to
first turn off the power of the camera.
• When you use a wireless LAN card, the throughput of
communication data through the Ethernet may
decrease.
42
Configuring the Network — Network setting Menu
PPPoE Tab - Setting of PPPoE
Connection
Use it when you connect the camera with PPPoE (Point-
to-Point Protocol over Ethernet). PPPoE connection is
the protocol that is widely used in xDSL (digital affiliate
line such as ADSL, VDSL or SDSL) as the
authentication and connection system.
PPPoE
Set whether you connect the camera using PPPoE
function or not. When On is selected, PPPoE connection
is used.
IP address
When you connect to the network by PPPoE function, IP
address obtained at PPPoE connection is displayed.
User ID
Type the user ID for the authentication necessary for
PPPoE connection. Type it up to 64 characters.
Password
Type the password for the authentication necessary for
PPPoE connection. Type it from 1 to 32 characters.
Re-type password
To certain the password, re-type the characters as them
typed in the password box.
Obtain DNS server address automatically
Select it to obtain the address of DNS server
automatically.
Use the following DNS server address
Select this when you set the fixed address as the IP
address of DNS server.