Picture Tab - Sony SNC-RZ25N User Manual

when Optical is selected, an image can be zoomed up to
18X optical zoom.
Focus mode
Selects Focus mode. When Auto is selected, the focus is
automatically adjusted.
When Manual is selected, the focus can be adjusted by
using the Near Far and One Push Focus buttons of the
control panel displayed from the main viewer.
Microphone
Select whether you send the audio from the m
microphone input connector. Select On to send the
audio from this network camera.
Note
When you change the Microphone setting, click
Refresh of the browser to reflect the change in the
opening main viewer page.
Mic volume
Set the volume level of the audio input from the m
microphone input connectors. It is adjustable from –10
to +10.
Audio codec
Select the bit rate when you send the audio from the m
microphone input connectors. G.711 (64kbps), G.726
(40kbps), G.726 (32kbps), G.726 (24kbps) or G.726
(16kbps) can be selected.
Note
When the bit rate is set to other than G.711(64bps), the
audio is not output in the case you are using Java applet
viewer.
Speaker output
Set whether you output the audio which is input to the
audio input connectors of your computer to the speaker
(active speaker for example) connected to the camera
line output connectors by using SNC audio upload tool
included in the supplied CD-ROM.
Select On to accept the audio data transmission from
SNC audio upload tool.
OK/Cancel
See "Buttons common to every setting menu" on page
29.
36
Setting the Camera Image and Audio — Camera setting Menu

Picture Tab

You can set the color condition, exposure, etc. of the
camera.
White balance
Select the white balance mode from among Auto,
Indoor, Outdoor, One push WB, ATW, and Manual.
Auto: to automatically adjust the color to be close to the
one you are viewing. (approximately 3000K to
7500K)
Indoor: to adjust the white balance for shooting indoors
under an incandescent lamp (about 3200 K)
Outdoor: to adjust the white balance for shooting
outdoors (about 5800 K)
One push WB: The One push trigger button is
displayed. Click the button to adjust the white
balance instantly.
ATW: Makes the subject to lights and automatically
adjusts to re-create the original color. (approximately
2000k to 10000k)
Manual: When you select this, R Gain and B Gain are
displayed and you can set them.
Selectable gain values are from 0 to 255.
Exposure mode
Select the exposure mode of the camera from among
Full auto, Shutter priority, Iris priority, and Manual.
The setting items required for each setting appear.
Full auto: The camera executes the gain adjustment and
the iris adjustment automatically. In this case, the
shutter speed is fixed.
When you select this, Slow shutter and Backlight
compensation are displayed and you can set them as
you require.
Shutter priority: The camera executes the gain
adjustment and the iris adjustment automatically and
you can select the shutter speed. When you select it,
Shutter speed are displayed and you can set them.