Wireless Tab - Setting Of Wireless Connection - Sony IPELA SNC-RX550N User Manual

Default gateway
Type the default gateway.
DNS server
Configure the DNS server address.
Obtain DNS server address automatically: Select this
option to obtain the IP address of DNS server
automatically. It can be set only when Obtain an IP
address automatically (DHCP) is selected.
Use the following DNS server address: Select this
when you set a fixed address as the IP address of the
DNS server. With this setting, specify the addresses
on Primary DNS server and Secondary DNS
server manually.
Note
When you select Obtain DNS server address
automatically, make sure that a DHCP server is
operating on the network.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server, if
necessary.
HTTP port number
Normally select 80. If you want to use a port number
other than 80, select the text box and type a port number
between 1024 and 65535.
Note
When you have set the HTTP port number to a number
other than 80 in the Network menu or in the Setup
Program, access the camera by typing the IP address of
the camera on your web browser as follows:
Example: when the HTTP port number is set to 8000
OK/Cancel
See "Buttons common to every menu" on page 30.
42
Configuring the Network — Network Menu
—
Wireless Tab Setting of wireless
connection
Insert the specified wireless card into the PC card slot of
the camera, and set the items for connecting to the
wireless network.
Before setting, read the operation manual and
installation manual supplied with the wireless card
together with this guide.
Verified wireless cards
Sony Wireless Card SNCA-CFW1 (not supplied) with a
commercially available CompactFlash type II-PCMCIA
adapter
Notes
• Before removing the wireless card from the camera,
turn off the power of the camera.
• The throughput of the data transmission/reception via
the network cable may decrease when the wireless
card is in use.
MAC address
Displays the MAC address of the wireless card inserted
to the PC card slot.
If a wireless card is not inserted, "00:00:00:00:00:00" is
displayed.
IP address
Configure the IP address for a wireless network.
Obtain an IP address automatically (DHCP): Select
this option when a DHCP server is installed on the
network to allow IP address assignment. With this
setting, the IP address is assigned automatically.