Setting The Alarm Output - Alarm Output Setting Menu; Alarm Output 1, 2 Tab - Sony SNC-RZ25N User Manual

Note
Note the followings when you log in the FTP server of
the camera using the FTP client software of the
computer.
• The frame rate and the operativity of the monitor
window in the main viewer will degrade.
• While recording the image using the Image memory
function, you cannot delete the recording directory.
• When the recorded image or audio file is deleted, the
camera counts the free space of the built-in memory
again at logging off.
56
Setting the Alarm Output — Alarm output setting Menu
Setting the Alarm Output
— Alarm output setting Menu
When you click Alarm output on the Administrator
menu, the Alarm output setting menu appears.
You can set in this menu to control the alarm out of I/O
port on the rear of the camera linked to the alarm
detection, the timer and the Dya/Night function.

Alarm output 1, 2 Tab

Alarm output
To activate the Alarm output function, select On. The
basic setting options are displayed below.
When you do not use the Alarm output function, select
Off.
Mode
Select the mode of the Alarm output function.
Alarm: Controls alarm output by synchronizing with an
external sensor input or the built-in activity detection
function.
Timer: Controls alarm output by the timer.
Day/Night: Controls the alarm output linked to the day/
night function.
Alarm
This item is displayed when Mode is set to Alarm.
Select the alarm to link the alarm output function. If the
selected alarm is detected, the alarm output status
changes.
Sensor input1: The external sensor which is connected
to sensor input1 of the camera I/O port.
Sensor input2: The external sensor which is connected
to sensor input2 of the camera I/O port.