Garmin GPS 175 Pilot's Manual page 210

Qualification
GLOVE QUALIFICATION STEPS
Complete only the tasks for the capabilities relevant to the installed navigator.
1. Sit in the pilot's seat.
2. Start the unit in normal mode.
3. Perform the tasks listed in table 1 and table 2, tapping each key with a
non-gloved finger. It is not necessary to record any results for this step.
4. Repeat step 3 using a gloved hand.
5. For each task, determine whether the touchscreen response is the same or
worse than without the glove.
6. Record the results in the applicable table. Items that may cause the operation
to be worse include, but are not limited to:
Multiple attempts to select a key
•
Unintentional selection of adjacent key(s)
•
• Excessive force on the touchscreen to select a key
7. If all applicable tasks produce the same response with and without a glove,
the pilot may use the glove in flight.
GLOVE QUALIFICATION PROCEDURE
Pilot:
Glove Description:
Circle the applicable navigator.
GPS 175 GNX 375
7-2 GPS 175/GNX 375 Pilot's Guide 190-02207-02 Rev. 1