3.9
Waypoint Options
SELECTION
Insert Before
Insert After
Load PROC
Load Airway
Activate Leg
Hold at WPT
WPT Info
Remove
190-02207-02 Rev. 1
Selecting a waypoint identifier opens a menu.
Changes to the active flight plan take effect
immediately.
Insert a new waypoint into a flight plan
•
Add an airway or procedure
•
Change the active leg
•
•
Remove a selected waypoint
Add a holding pattern to an existing waypoint
•
View information about a waypoint
•
Insert a new waypoint before the selected waypoint
•
•
Insert a new waypoint after the selected waypoint
Load and activate an approach, arrival, departure,
•
missed approach, and vectors to final
Assign an airway and exit waypoint to the selected
•
entry waypoint (e.g., intersection, VOR)
•
Designate any TO waypoint as the active leg
Create a user-defined hold at the selected waypoint
•
Specify hold parameters and preview holding
•
patterns from a dedicated menu page
Open the dedicated information page for the
•
selected waypoint
Remove the selected waypoint or hold from the
•
active flight plan
GPS 175/GNX 375 Pilot's Guide
FUNCTION
Navigation
-
3
33