Garmin GPS 175 Pilot's Manual page 112

Navigation
NAVIGATION
OPTION
OFF-ROUTE
COURSE
USER-DEFINED
HOLD
3-38
INFORMATION AND INSTRUCTIONS
There are three options for creating an off-route and direct
course; Waypoint or NRST APT tab, or selecting a location
on the map. Activating an off-route Direct-To course
automatically deactivates the current (or existing) flight
plan. Removing the Direct-To course reactivates the original
active flight plan and waypoint sequencing.
Create user-defined holds as part of a direct-to function to
a location. Modify course holds using these hold options.
• Course - Course Angle
Direction - Inbound or Outbound
•
Turn - Left or Right
•
Leg Type - Time or Distance
•
Leg Time/Distance - Enter Time or Distance
•
• EFC - Expect Further Clearance Reminder
Create a user-defined hold. When a user hold is changed
with the Direct-To key, navigation guidance returns to the
holding fix and the new hold initiates. Automatic waypoint
sequencing suspends during the hold.
1. Tap Direct-To > Hold > modify the course options.
2. Then tap Load Hold > Hold Activate.
GPS 175/GNX 375 Pilot's Guide 190-02207-02 Rev. 1