Edit An Existing User Waypoint; Import User Waypoints - Garmin GPS 175 Pilot's Manual

Navigation
3.16.2

Edit an Existing User Waypoint

FEATURE LIMITATIONS
User waypoints that are part of a flight plan are not editable.
OPEN EDIT WAYPOINT PAGE
You can access the edit function multiple ways.
From the dedicated information page:
Home > Waypoint Info > User WPT > Specify an identifier, or tap View List and
select an identifier from the used waypoints list > Edit
From the Nearest page:
Home > Nearest > User WPT > Select an identifier from the list (e.g., USR001) >
Edit
From the Active FPL page:
Home > Flight Plan > Select the identifier from the flight plan > WPT Info > Edit
MODIFY POSITION VALUES
From the Edit WPT page, you can modify a user waypoint's position one of two ways:
1. Tap Position > Latitude/Longitude > Specify the waypoint's coordinates >
Save.
OR
1. Tap Graphical Edit.
2. Hold and drag the basemap until the user waypoint icon appears over the
desired location.
3. Tap Enter > Save.
3.16.3

Import User Waypoints

NOTE
The import function overwrites any existing user waypoint of the same
name.
The Import Waypoints key appears when the unit detects a user
waypoint on the datacard.
1. Insert datacard containing user waypoints.
2. From the Home page, tap Waypoint Info > Import Waypoints.
3. Acknowledge the pop-up message.
3-54 GPS 175/GNX 375 Pilot's Guide 190-02207-02 Rev. B