Select User Waypoint By Name - Garmin GTN 750 Pilot's Manual Upgrade Supplement

8.7
Foreword
NOTE: User airport feature is available in software v6.50 and later.
Getting
Started
In addition to the airport, VOR, NDB and intersection information contained
Audio &
in the navigation database, the GTN 7XX allows you to store up to 1,000
Xpdr Ctrl
user-defined waypoints. The User Waypoint page displays the waypoint name
Com/Nav
(up to six characters long), location, and elevation (user airports only).
To minimize nuisance terrain alerting when landing at airports not in the
FPL
navigation database, user waypoints may be configured as user airports. User
airports display on both the Waypoint Info and Nearest Airport pages.
Direct-To
Proc
Identifier, Symbol,
Charts
& References
Wpts Used
Wpt Info
View All Wpts
Map
Edit Wpt
Traffic
Area Map
Touch & Move
Terrain
Finger While
Pressing To Pan Map
Weather
Nearest

Select User Waypoint by Name

Services/
Music
Utilities
System
Messages
Symbols
Appendix
8-16
Index
User Waypoints
Distance & Bearing To Wpt
From Current Position
Figure 8-20 Waypoint Info for a User Waypoint
1. While viewing the User Waypoint page, touch the User
Waypoint Name.
2. Use the keypad to select the characters for the name and then
touch Enter.
GTN 725/750 Pilot's Guide
Reference Wpt
Delete Wpt
Wpt Symbol
& Identifier
Map Scale
Touch To Zoom
190-01007-03 Rev. Q