6,000 Miles Or 6 Months; 12,000 Miles Or 12 Months; Tires; Welding Repairs - Meridian 112BST Operator's Manual

10.14.3 6,000 Miles or 6 Months

1. Inspect brake magnets for wear. Refer to
OEM manual for procedure.
2. Inspect suspension parts for wear. Refer to
OEM manual for procedure.

10.14.4 12,000 Miles or 12 Months

1. Inspect brake lining wear, check brake cylinder
for leaks, and inspect brake wiring for damage.
Refer to OEM manual for procedure.
2. Grease the wheel bearings and check the hub
for wear. Refer to OEM manual for procedure.
3. Inspect grease seal for leakage. Refer to
OEM manual for procedure.
4. Inspect springs for any wear or loss of arch.
Refer to OEM manual for procedure.

10.15 TIRES

Check the tires for normal and/or abnormal tire
wear. Replace tires that are damaged or worn
beyond normal tread life. Refer to the axle OEM
manual for a Tire Wear Diagnostic Chart.
Replace the tires with Meridian part number 18131
or an equivalent tire:
3T235/80R16
TR643
Load Range E
For Trailer Service Only
48

10.16 WELDING REPAIRS

Repair welding must be done with care
and with procedures that may be beyond
the capabilities of the ordinary welder.
Before performing any type of welding repair to the
seed tender, contact Meridian for approval.
WARNING
PERSONAL INJURY HAZARD
Repairs or modifications to the trailer,
trailer tongue, or trailer hitch can result
in serious injury or death should these
repairs fail.
IMPORTANT NOTICE
Anyone performing a welding repair should be
certifiedinaccordancetotheAmericanWelding
Society (AWS) standards.