Service Record Chart - Meridian 112BST Operator's Manual

10.12 SERVICE RECORD CHART

The chart on the following page should be copied
andfilledoutasmaintenanceisperformedonthe
machine. Refer to the Lubrication, Maintenance,
and Service sections for additional instructions.
Date
Serviced by
8 hours or daily
Check Engine Fluid Levels
Check Reduction Case Oil Level
Test Break-Away Brake System
Inspect Tires
Check Drive Belt Tension and Alignment
50 Hours or Weekly
Clean Engine Air Intake Filter
Check Tire Pressure
Check Drive Belt Tension and Alignment
200 Hours or Semi/Annual
Adjust Brakes
Inspect Brake Magnets
Battery - Make sure strap is securely
holding battery onto frame, check
electrolyte levels in the cells, and clean
terminals to remove any dirt or corrosion.
400 hours or annually
Change Engine Oil
Change Reduction Case Oil
Check Wheel Bolt Torque
Check Frame Hold-Downs
Inspect Brake Lining Wear, Brake Cylinder,
and Brake Wiring
Repack Wheel Bearings and Check Hub for
Wear
Inspect Axle Grease Seal
Inspect Springs for Wear
Inspect all electrical wiring connections for
looseness or corrosion. Tighten and/or
seal, as necessary.
Thoroughly Clean Machine
46