Table of Contents
Advertisement
3. Openthecoveroftheseedtenderandfillit
with seed from a storage box, storage bag, or
other means. Follow the safety instructions
in the Opening and Closing Bin Cover
section of this manual.
4. Whenthebinisfilled,closethecoverandlock
it in place with the rubber latch.
IMPORTANT
Make sure the cover is closed and the rubber latch
is locked in place before towing the seed tender.
Failure to lock the rubber latch could allow the
cover to blow open, resulting in damage to the
unit.
5. Move the unit to the location of the planting
equipment following all safe towing practices.
8.3.2 Unloading Seed Tender
The seed tender will only unload from the left side.
1. Position the seed tender near the planter.
2. Before unloading, shut off the engine of the
tow vehicle, set the parking brake, and remove
the ignition key, and wait for all moving parts
to stop before leaving the cab.
3. Check the surrounding area for overhead
power lines that would contact the auger tube
in its raised position. Contact with electricity
can result in serious personal injury or
death.
30
WARNING
ELECTROCUTION HAZARD
Avoid contact with overhead
power lines or electrically
powered objects.
1. Be aware of your surroundings
when raising or lowering any
part of the equipment.
2. Maintain at least 20 feet between the
equipment and any electrical hazard.
3. Contact with electricity can result in serious
personal injury or death.
4. Unlatch the rubber tie-down strap from the
delivery spout.
5. Lower the delivery spout to the ground.
6. Make sure the auger cable is threaded into
the hole in the end of the auger. Damage to
the auger can occur if the cable is not properly
inserted.
Advertisement
Table of Contents
