Management Of Setting Values; Storing Set Value Permanently - Denso BHT-1700 Series User Manual

13.8. Management of Setting Values

 Reset to factory defaults
Resets the setting contents to the factory default. Select [Resets to the factory defaults] and select [OK] on the
setting value initialization check dialogue. Then, the setting value resets to the factory default.

13.8.1. Storing Set Value Permanently

By storing the setting file in the internal shared storage/StartupSettingsData/Setup/Barcode/ folder, the file can
be stored permanently without losing the setting contents after Enterprise Reset. The same setting contents
can be reflected on another device by exporting the contents set in one device, storing them in the above
directory of another device, and executing Enterprise Reset to the device.
All settings are managed with xml file (hereinafter referred to as settings file).
When a settings file saved in the appropriate place is imported, the setting value defined
in the settings file is reflected on the menu. Next time reading barcode is enabled, the
setting value is reflected on the device.
The setting value set in the menu can also be exported to a file.
Exporting contents set in one device and importing them in another device enables to
use the same setting value.
The setting file is operated from the barcode scanner setting menu.
 Import
Selects a setting file to be imported.
 Export
Selects a place where a setting file is exported.
- 152 -