Touch Trigger; Function; Start/Stop - Denso BHT-1700 Series User Manual

14. Touch Trigger

It is an application to show a trigger button on the screen.
By tapping a trigger button, barcodes starts to be read.
Tap in the App. list, and the touch trigger starts up and the main screen is displayed.
When the barcode reading function is OFF, reading will not be operated even if a button is pressed.
━ Point ━

14.1. Function

14.1.1. Start/Stop

This function changes the trigger button indication status.
Item
Start
Stop
When you start tapping the trriger button, the button indication is changed to "Tapped", and then the barcode
reading starts.
When you stop tapping the trigger button, the button indication returns to "Normal" and the barcode reading stops.
A place to indicate a trigger button can be changed by dragging and dropping the displayed trigger button.
Normal:
Description
Displays a trigger button the size of which has been set.
Stops displaying the trigger button.
Tapped:
- 159 -