81183_2 S2.book Page 9 Tuesday, May 6, 2003 8:39 AM
Chapter 2: ST290 Graphic Display
Using Favorite pages
The Favorite chapter enables you to group together in one chapter,
information you use most often. You can include information from any
other chapter, to form a Favorite chapter of up to five pages.
To see the Favorite pages, use the
and the
Note: If the Favorite chapter is set to operate with an automatic rollover,
the
Setup overview
You can set each Favorite page to any one of the Graphic Display
standard formats, shown in Figure 2-5 :
•
•
•
You can set each page element to show any type of available data. All the
data in the Graphic Display Full profile is available.
In addition, if ST290 is connected to a computer running Raymarine
RayTech, you can allocate RayTech pages as Favorite pages.
Note: To determine which RayTech pages are available, refer to your
RayTech handbook.
To define how many pages are in the Favorite chapter and whether an
automatic, timed rollover is applied to your Favorite pages, use the
procedures in Section 7, Chapter 2.
Setting the contents of Favorite pages
To define the content of the Favorite pages:
1. Select the Favorite chapter.
2. Use the
3. Hold down the
ST290 Instrument System Owner's Handbook
button to select the required Favorite pages.
button has no effect.
Single element.
Dual element.
Quad element.
button to display the Favorite page you want to configure.
button for 1 second to enter Favorite page edit
mode, with the Favorite page setup menu displayed (Figure 2-10 ).
button to select the Favorite chapter
2-2-9