Connections To Spring Retention Connectors - Raymarine ST290 Owner's Handbook Manual

81183_2 S6.book Page 6 Wednesday, May 7, 2003 11:27 AM
6-2-6 Section 6: Installation
2
SeaTALK Red or Black wire
All other wires
3 mm
D5906-1
Figure 2-4: Inserting wires in spade connectors

Connections to spring retention connectors

The DPU and transducer Pods use color-coded, spring retention
2
connectors for SeaTALK connections. To make a secure connection to a
spring retention connector, prepare the cable for connection as shown in,
Figure 2-5 , then use the method illustrated in Figure 2-6 to connect each
wire.
50 mm 9 mm
D5905-1
Figure 2-5: Preparing cable for spring retention connectors
D5907-1
Figure 2-6: Connecting to spring retention connector
ST290 Instrument System Owner's Handbook