Switching Instrument Pages On & Off - Raymarine ST70+ Operating Manual

13
Card
Applicability:
Introduction
If you need to quickly access only certain Instrument pages, you can switch OFF pages you
do not need, to reduce the time it takes to access the pages you want to see. Use the proce-
dure on this card to switch pages off or back on again, as required.
This is a particularly useful feature if you are using the automatic rollover to select pages
(see Card 14).
Switching pages
1. Starting
With any operational page displayed, press
play the Main Menu, then scroll to the Page Layout
option.
OK
Press to show the Page Layout menu
At the Page Layout menu, scroll to the page you want to
change.
2. Select option
OK
Press to display the setup options menu for the page
you have selected.
Scroll to the Turn page on/off option.Press
the on/off select box
3. Select off or on
Scroll to select On or Off as required.
OK
Press to return to the setup options menu.
Returning to operating page
To return to normal operation from the setup options menu
CANCEL
press three times.:
Switching instrument pages on & off
The procedures on this card apply to all configurations of ST70+ Instruments.
They do NOT apply to ST70+ Pilot Controllers.
MENU
, to dis-
Page Layout
Select the page you wish to
i
configure.
Page 1 Setup
OK
to display
Page 1
CANCEL exits without saving.
i
ST70+ Instrument
Page 1 On
Press OK to select
Turn page on/off
Press OK to select
On
Press OK to accept