Troubleshooting - Sony Cyber-shot DSC-P10 Operating Instructions Manual

Troubleshooting

Troubleshooting
If you experience trouble with your camera,
try the following solutions.
1 First check the items on the tables below.
If code displays "C:ss:ss"
appear on the screen, the self-
diagnosis display function is
working (page 97).
Battery pack and power
Symptom
You cannot charge the
battery pack.
The battery pack cannot
be installed.
The /CHG lamp flashes.
The /CHG lamp does not
light up when charging a
battery pack.
2 Should your camera still not work
properly, press the RESET button inside
the battery/"Memory Stick" cover using
a fine-tripped object, then turn on the
power again. (All the settings including
date and time are cleared.)
Cause
• The camera is turned on.
• The battery pack is not installed correctly.
• The battery pack is not installed correctly.
• The battery pack has malfunctioned.
• The AC Adaptor is disconnected.
• The battery pack is not installed correctly.
• The battery pack is completely charged.
3 Should your camera still not work
properly, consult your Sony dealer or
local authorized Sony service facility.
RESET button
Solution
p Turn the camera off (page 14).
p Install the battery pack while pushing the battery eject lever
down using the front edge of the battery pack (page 10).
p Install the battery pack correctly (page 10).
p Consult your Sony dealer or local authorized Sony service
facility.
p Properly connect the AC Adaptor (page 10).
p Install the battery pack correctly (page 10).
—
87