SET UP items
Set the mode dial to SET UP. The SET UP
screen appears.
Factory settings are indicated with x.
(Camera 1) (DSC-P10/P12)/
1
Item
Moving Image
AF Mode
Smart Zoom
Date/time
Red Eye Reduction
AF Illuminator
(Camera 2) (DSC-P10/P12 only)
2
Item
Bracket Step
104
(Camera) (DSC-P8)
Setting
x
MPEG Movie
Clip Motion
/
/
Multi Burst
Single / Monitor / Cont
x
x
On / Off
Day&Time / Date / x
Off
On /
x
Off
x
Auto / Off
Setting
±1.0EV / x±0.7EV / ±0.3EV
Description
Selects the shooting mode (pages 51, 52 and 68).
Selects the focus operation mode (page 43).
Selects whether to use the smart zoom (page 23).
Selects whether to insert the date and time into the image (page 29). When shooting
movies (MPEG Movie), or images recorded in Clip Motion/Multi Burst modes, the
date and time cannot be inserted in the image. Also, the date and time will not be
displayed when shooting. The date and time will be displayed when the image is
played back.
Reduces the red-eye phenomenon when using a flash (page 27).
Selects whether to emit an AF assist light in the dark. Helps when it is hard to focus
on the subject under dark lighting (page 27).
Description
Sets the exposure compensation value when recording three images with each
sxposure value shifted (page 48).