To Remove The Battery Pack - Sony Cyber-shot DSC-P10 Operating Instructions Manual

2 To wall outlet (wall socket)
1
Power cord
4
(mains lead)
, Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.
/CHG
/CHG lamp
• After charging the battery pack, disconnect the
AC Adaptor from the DC IN jack of your
camera.

To remove the battery pack

Battery eject lever
Open the battery/"Memory Stick" cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator on the LCD
screen shows the remaining shooting or viewing
time.
60
min
101
3.1M
S AF
• The black portion of the battery remaining
indicator in the illustration shows the actual
remaining time.
• When you switch the LCD screen on/off, it
takes about one minute for the correct battery
remaining time to appear.
• The displayed time remaining may not be
correct under certain circumstances or
conditions.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-LS5 AC
Adaptor at a temperature of 25°C (77°F).
Charging time
Battery pack
(min.)
NP-FC11 (supplied) Approx. 150
4
11