Viewing Images On A Tv Screen - Sony Cyber-shot DSC-P10 Operating Instructions Manual

Viewing images on a TV screen

A/V OUT
(MONO)
jack
A/V connecting cable
(supplied)
1
, Connect the supplied A/V
connecting cable to the A/V
OUT (MONO) jack of the
camera and the audio/video
input jacks of the TV.
If your TV has stereo input jacks, connect
the audio plug (black) of the A/V
connecting cable to the left audio jack.
• Turn off both your camera and the TV before
connecting the camera and the TV with the A/V
connecting cable.
32
2
TV/Video switch
, Turn on the TV and set the TV/
Video switch to "Video".
• The name and location of this switch may differ
depending on your TV. For a details, see the
operating instructions supplied with the TV.
101-0002 2003 7 4
BACK/NEXT
3
, Set the mode dial to
turn on the camera.
Press b/B on the control button to select the
desired image.
• When using your camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 106).
VGA
101 2 / 9
10:30
PM
VOLUME
, and