Self-Diagnosis Display - Sony Cyber-shot DSC-P10 Operating Instructions Manual

Self-diagnosis display

– If a code starting with an alphabet
letter appears
Your camera has a self-diagnosis display.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.
C:32:ss
Self-diagnosis display
Code Cause
C:32: ss
There is trouble with your
camera's hardware.
C:13: ss
The camera cannot read or write
data on the "Memory Stick."
An unformatted "Memory Stick"
is inserted.
The inserted "Memory Stick"
cannot be used with your camera,
or the data is damaged.
E:61: ss
A camera malfunction that you
E:91: ss cannot reverse has occurred.
If you are unable to solve the problem even
after trying the corrective actions a few
times, contact your Sony dealer or local
authorized Sony service facility and inform
them of the 5-digit code.
Countermeasure
• Turn the power off and on again
(page 14).
• Re-insert the "Memory Stick" several
times.
• Format the "Memory Stick" (page 37).
• Insert a new "Memory Stick" (page 17).
• Press the RESET button (page 87) located
inside the battery/"Memory Stick" cover,
then turn the power on again.
97