Getting Started; Charging The Battery Pack - Sony Cyber-shot DSC-P10 Operating Instructions Manual

Charging the battery pack

1
, Open the battery/"Memory
Stick" cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 14).
• Your camera operates with the
"InfoLITHIUM" NP-FC11 battery pack (C
type) (supplied). You can use only C type
battery pack (page 109).
10

Getting started

Battery eject lever
2
, Install the battery pack, then
close the battery/"Memory
Stick" cover.
Insert the battery pack with the B mark
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
• The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment down.
Jack cover
DC plug
3
, Open the jack cover and
connect the AC-LS5 AC
Adaptor (supplied) to the DC IN
jack of your camera.
Open the cover in the arrow direction as
illustrated above. Connect the plug with the
v mark facing up.
• Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
• Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
AC
Adaptor