Checking The Last Image You Shot - Quick Review; Indicators On The Lcd Screen During Shooting - Sony Cyber-shot DSC-T3 Operating Instructions Manual

Auto Focus
When you try to shoot a subject that is
difficult to focus on, the AE/AF lock
indicator changes to flashing slowly. In
addition, the AE locked beep does not
sound.
The Auto Focus function may have
difficulty working under the following
conditions. In such cases, release the
shutter button, then recompose the shot
and focus again.
The subject is distant from the camera
•
and dark.
The contrast between the subject and its
•
background is poor.
• The subject is seen through glass, such
as a window.
A fast-moving subject.
•
The subject reflects or has a lustrous
•
finish, such as a mirror or a luminous
body.
• A flashing subject.
A backlit subject.
•
There are two Auto Focus functions: "AF
range finder frame" which sets the focus
position according to the subject position
and size, and "AF mode" which sets the
focus start/finish timing. See page 57 for
details.
32
Checking the last image
you shot — Quick Review
60min
Review
101 - 0029
2005 1 1
RETURN
 Press  () on the control
button.
To return to the normal shooting mode,
press lightly on the shutter button or press
 () again.
To delete the image displayed on
the LCD screen
Press (Delete).
1
Select [Delete] with  on the control
2
button, then press .
The image is deleted.
• The image may appear rough right after
playback starts due to the image processing.
Indicators on the LCD
screen during shooting
VGA
8 8
101 /
10:30
PM
Each time you press
changes in the following order.
• For a detailed description of the indicators, see
page 133.
• For a detailed description of the histogram, see
page 61.
• You can extend the battery remaining time by
turning off the LCD backlight.
• When shooting/viewing movies, the status of
the LCD screen changes as follows: Indicators
off  LCD backlight off  Indicators on
• This setting is maintained even when the power
is turned off.
, the display