Connecting The Camera To A Computer - Sony ILCE-9M3 Help Manual

Interchangeable lens digital camera

Hide thumbs Also See for ILCE-9M3:

Table of Contents

Interchangeable Lens Digital Camera

Connecting the camera to a computer

Insert a sufficiently charged battery pack into the camera.

Turn on the camera and the computer.

(Setup) → [USB] → Set [USB Connection Mode] to [MassStorage(MSC)].

Connect the USB Type-C terminal on the camera to the computer with a USB cable (commercially available).

When you connect the camera to the computer for the first time, the procedure for recognizing the camera may

start automatically on the computer. Wait until the procedure is finished.

If you connect the camera to your computer using the USB cable when [USB Power Supply] is set to [On],

power is supplied from your computer. (Default setting: [On])

Use a cable that complies with the USB standard.

Use a SuperSpeed USB 10Gbps (USB 3.2)-compatible computer and a USB cable (commercially available) for

higher-speed communications.

Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established

between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or

waking the computer from sleep mode, disconnect the camera from the computer.