Using The Wireless Headphones; Setting Up The Headphones; Using The Headphones - Sony WEGA KV-36XBR250, KV-32XBR250 Operating Instructions Manual

Using the Wireless Headphones

Setting Up the Headphones

Install the supplied size AA (R6) battery into
the headphones.
1
Open the battery compartment lid by
pressing and sliding the lid as illustrated.
2
Lift the cover and insert the battery into
the compartment with the positive side up
and then close the lid.
Notes
• When used continuously, the battery will last:
— up to 40 hours with alkaline batteries.
— up to 20 hours with manganese batteries.
• Replace the battery with a new one when the
sound becomes weak.
18

Using the Headphones

PICTURE
MODE
MODE
SWAP
TV/SAT
VOL
MENU
1
Press .
The 2 icon and channel number are
displayed.
2
Turn the power on by placing the
headphones securely on your head.
Power indicator
Volume control
If you only want to listen to the sound from
the cordless headphones, turn down the TV
speaker volume, or press MUTING.
3
To turn off the headphones, remove them
from your head and press
Tip z
For optimal sound reception, do not cover the infrared
transmitter on the TV or the infrared sensors on the
headphones.
GUIDE
CH
Infrared transmitter
Notes
• To help prevent possible hearing damage
due to sudden or prolonged excessive
volume, do not set the headphone
volume too high while using them.
• To prevent possible damage to the
infrared transmitter in the television,
please press the
headphone feature when the headphones
are not in use.
.
Infrared sensors
to turn off the