Connecting Headphones - Sony WEGA KV 20FA210 Operating Instructions Manual

Operating Instructions
Connecting a Camcorder
To connect your camcorder, you can use the Audio/Video inputs on either the front or rear panel of the
TV. Using the audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your camcorder
to the AUDIO/VIDEO IN on your TV.
A/V output

Connecting Headphones

Connect the headphones to the
Connecting an Audio System
1
Using audio/video cables (not supplied), connect AUDIO OUT on your TV to one of the unused
line inputs (e.g. TV, AUX, TAPE2) on your stereo.
2
Set the Speaker option to Off. For more instructions, see "Using the Audio Menu" on page 27.
3
Open the Audio Out option on the Audio Menu and select Fixed to control the volume through the
connected audio system. For more instructions, see "Using the Audio Menu" on page 27.
✍
For this connection you don't need to disconnect Dynamic Bass Response System.
18
Front A/V Panel
jack on the front Audio/Video panel. Headphone jack is STEREO.
Front A/V Panel
Rear of TV
1 3
AUDIO-L (white)
AUDIO UDIO
AUDIO UDIO
AUDIO-R (red)
Audio R (red)
Audio L (white)
Video (yellow)
Line
input