Note About The Ac Power Cord; Cable Or Antenna Connections; Cable And Antenna - Sony WEGA KV-36XBR250, KV-32XBR250 Operating Instructions Manual

Note about the AC Power Cord

The AC power cord is attached to the rear of
the TV with hooks. Use caution when
removing the AC plug from its holder. Gently
slide the cord in the upward direction, without
removing the cord from the two lower hooks.
You can
detach the
cord from
this hook
AC Power
cord

Cable or Antenna Connections

Connecting directly to cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will
be equipped with standard coaxial cable (see
A
); older homes will probably have 300 -ohm
B
twin lead cable (see ); still other homes may
C
contain both (see ).
A
• VHF only
or
• VHF/UHF
or
• Cable
B
• VHF only
or
• UHF only
Do not remove
or
the cord from
• VHF/UHF
these hooks.
C
• VHF
and
• UHF
75-ohm
(Rear of TV)
VHF/UHF
coaxial cable
300-ohm twin
(Rear of TV)
lead cable VHF/UHF
Antenna connector
75-ohm coaxial cable
(Rear of TV)
VHF/UHF
U/V mixer
(not supplied)
300-ohm twin lead cable

Cable and antenna

If your cable provider does not feature local
channels, you may find this set up convenient.
CATV cable
(No connection "TO
CONVERTER" in this case)
Antenna cable
Select CABLE or antenna (ANT) mode by
pressing ANT on the remote control.
Note
In order to receive channels with an antenna,
you will need to turn your CABLE to OFF and
perform the AUTO PROGRAM function, (see
page 26).
(Rear of TV)
AUX
TO CONVERTER
VHF/UHF
3