Sony KV-32FQ80U Quick Start Manual

KV-32FQ80U
KV-36FQ80U
Thank you for choosing this Sony
Trinitron Television.
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
Tune your TV.
View TV programmes.
4-090-013-01
Checking the supplied
1
accessories
VCR TV DVD
MODE
Remote Control
Inserting batteries into
2

the remote control

1
2
Always remember to:
• observe the correct polarity when inserting batteries,
• dispose of batteries in an environmentally friendly way.
3
Connecting an aerial only
Batteries
1. Connect your aerial lead to the aerial socket labelled 8 on the rear of the TV.
Connecting an aerial and VCR
Scart lead
(not supplied)
1. Connect your aerial lead to the IN* socket on your VCR.
2. Connect an RF lead from the OUT* socket on your VCR to the aerial socket labelled
8 on the rear of the TV.
3
3. Connect a fully wired 21-pin scart lead from the scart socket marked i3/r3 on the
rear of the TV to a scart socket on your VCR**
Notes: *Socket names may vary depending on make and model of VCR. Refer to your
VCR instruction manual for details.
**If your VCR does not have a scart socket follow the connecting instructions above
ignoring the scart lead connection.
You will also need to manually tune the VCR to a spare TV channel (ideally channel
0, refer to the 'Manual Programme Preset menu' section of the main instruction
manual).

Connecting the TV

4 s 4
(SMARTLINK)
3 s 3
VCR
2
DVD
1
ANALOGUE
R/D/D/D L/G/S/I
DOLBY. THE DOUBLE-D SYMBOL D D
ARE TRADEMARKS OF DOLBY
LABORATORIES
4 s 4
(SMARTLINK)
3 s 3
VCR
2
DVD
1
ANALOGUE
R/D/D/D L/G/S/I
DOLBY. THE DOUBLE-D SYMBOL D D
ARE TRADEMARKS OF DOLBY
LABORATORIES
RF lead
(not supplied)
VCR