Watching the TV
The following chart explains more advanced buttons
on your remote control.
Using the White Labeled Buttons for TV Operations
Press when you want to turn connected equipment on and off.
POWER
VTR/DVD SAT/CABLE
TV
Press when you want to control connected equipment with your remote control, (see
FUNCTION
VTR/DVD SAT/CABLE
TV
pages 32-34 for instructions on programming your remote control).
Use for direct channel selection. Press 0-9 to select a channel, the channel will
0
– 9
change after 2 seconds, or you can press ENTER for immediate selection.
PICTURE
Cycles through the VIDEO MODE settings: VIVID, STANDARD, MOVIE, SPORTS .
MODE
JUMP
Alternates back and forth between the last two channels selected with the 0-9 keys.
MUTING
Instantly turns off the sound. Press again or press VOL + to restore sound.
Turns the TV off in approximately 30, 60, or 90 minutes. Cancel by pressing until
SLEEP
SLEEP OFF appears.
RESET
Press to return to factory settings while in an on-screen menu.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
15