Operations
Watching the TV
1
Press POWER to turn the TV on.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
2
Select the TV channel you want to watch.
To select a channel directly
Press a number button.
1
4
7
÷
To select a two-digit channel, press "-/- -" before
the number buttons.
For example: to select channel 25, press "-/- -," and
then "2" and "5."
÷
To scan through channels
Press PROGR/PAGE +/– until the channel you
want appears.
3
Press VOL +/– to adjust the volume.
POWER
2
3
5
6
8
9
0
2
5
PROGR/PAGE
VOL
Switching off the TV
To switch off the TV temporarily, press POWER on the
remote commander.
To switch off the TV completely, press POWER.
If the power on the TV is turned off in standby mode,
the STANDBY indicator may remain alight for a while.
Watching the video input
Press VIDEO/HOLD.
VIDEO 1
VIDEO 2
To watch TV, press TV.
POWER
POWER
VIDEO
HOLD
VIDEO 3
1
TV
11
Getting Started
Operations