Global Commands - Alcatel-Lucent 7705 Service Manual

Global Commands

vprn
Syntax vprn service-id [customer customer-id]
no vprn service-id
Context config>service
Description This command creates or edits a Virtual Private Routed Network (VPRN) service instance.
If the service-id does not exist, a context for the service is created. If the service-id exists, the context
for editing the service is entered.
VPRN services allow the creation of customer-facing IP interfaces in a separate routing instance from
the one used for service network core routing connectivity. VPRN services allow the IP addressing
scheme used by the subscriber to overlap with other addressing schemes used by other VPRN
services or by the provider and, potentially, the entire Internet.
IP interfaces defined within the context of a VPRN service ID must have a SAP created as the access
point to the subscriber network.
When a service is created, the customer keyword and customer-id must be specified, which
associates the service with a customer. The customer-id must already exist, having been created using
the customer command in the service context. When a service is created with a customer association,
it is not possible to edit the customer association. To change the association between service and
customer, the service must be deleted and recreated with a new customer association.
Once a service is created, the use of customer customer-id is optional to navigate into the service
configuration context. Attempting to edit a service with an incorrect customer-id results in an error.
Multiple VPRN services are created in order to separate customer-owned IP interfaces. More than one
VPRN service can be created for a single customer ID. More than one IP interface can be created
within a single VPRN service ID. All IP interfaces created within a VPRN service ID belong to the
same customer.
The no form of the command deletes the VPRN service instance with the specified service-id. The
service cannot be deleted until all the IP interfaces and all routing protocol configurations defined
within the service ID have been shut down and deleted.
Default none
Parameters
service-id — the unique service identification number that identifies the service in the service domain.
7705 SAR OS Services Guide
The ID must be unique to this service and cannot be used for any other service of any type (such
as Epipe, Cpipe, IES). However, a VPRN instance in the service provider network can include
different service-id numbers on the routers in the network.
Values 1 to 2147483647
VPRN Services
Page 449