Programmable Digital Inputs; Update Cycles In The Control Program; Settings; Diagnostics - ABB ACS800 Series Firmware Manual

Programmable digital inputs

The drive has six programmable digital inputs as a standard. Six extra inputs are
available if the optional Digital I/O Extension Modules are used.

Update cycles in the Control Program

Input
DI / standard
DI / extension

Settings

Parameter
Group
Group
Group
Group
Group
Group
Group
Group
Group
98.03...98.04

Diagnostics

Actual Value
01.17
01.40
Warning
IO CONF
Cycle
50 ms
50 ms
10 START/STOP/DIR
11 REFERENCE SELECT
12 CONSTANT SPEEDS
16 SYS CTRL INPUTS
61 CORE SPEED MATCH
62 DANCER CONTROLS
63 TENSION CONTROLS
65 DIA CALC CONTROL
66 TORQUE MEM CTRL
Additional Information
Standard digital inputs
Optional digital inputs
Improper use of optional I/O
Additional Information
Start, stop, direction source
Reference selection, reference source
Constant speed selection
External run enable, fault reset, user macro change
Digital potentiometer for reference
Regulator control
Regulator control
Diameter reset
Torque memory control
Activation of the optional Digital I/O Extension Modules
29
Program features