ABB ACS800 Series Firmware Manual page 171

Table 17 Limit Word 1 (Actual Signal 02.23).
Bit Name
0 TORQ MOTOR LIM
1 SPD_TOR_MIN_LIM
2 SPD_TOR_MAX_LIM
3 TORQ_USER_CUR_LIM
4 TORQ_INV_CUR_LIM
5 TORQ_MIN_LIM
6 TORQ_MAX_LIM
7 TREF_TORQ_MIN_LIM
8 TREF_TORQ_MAX_LIM
9 FLUX_MIN_LIM
10 FREQ_MIN_LIMIT
11 FREQ_MAX_LIMIT
12 DC_UNDERVOLT
13 DC_OVERVOLT
14 TORQUE LIMIT
15 FREQ_LIMIT
Table 18 Follower MCW (Actual Signal 02.25)
Bit Name
0 DRIVE ENABLED
1 Reserved
2 REVERSE CMD
3 DRIVE RUNNING
4 DIAMETER RESET
5 Reserved
6 HEARTBEAT
7 FAULT RESET CMD
8...15 Reserved
Active Limit
Pull-out limit.
Speed control torque min. limit.
Speed control torque max. limit.
User-defined current limit.
Internal current limit.
Any torque min. limit.
Any torque max. limit.
Torque reference min. limit.
Torque reference max. limit.
Flux reference min. limit.
Speed/Frequency min. limit.
Speed/Frequency max. limit.
DC undervoltage limit.
DC overvoltage limit.
Any torque limit.
Any speed/frequency limit.
Description
See chapter Actual signals and
See chapter Actual signals and
See chapter Actual signals and
See chapter Actual signals and
See chapter Actual signals and
parameters, parameter 16.01.
parameters, parameter 10.02.
parameters, parameter 10.01.
parameters, parameter 65.03.
parameters, parameter 16.04.
Fieldbus control
159