5.1 Overview
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•
Creating a VLAN
•
Setting Port VID
•
Configuring Switch Management IP Address
5.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 31 Initial Setup Network Example: VLAN
Click Advanced Application > VLAN > VLAN Configuration in the navigation panel and click the Static
1
VLAN Setup link.
Initial Setup Example
XS3800-28 User's Guide
59
C
H A P T E R
5