General Setup - ZyXEL Communications XS3800-28 User Manual

Table 14 Basic Setting > System Info > Hardware Monitor (Stacking Mode) (continued)
LABEL
Status
Voltage (V)
Current
MAX
MIN
Threshold
Status
Power Source
Status

8.2 General Setup

Use this screen to configure general settings such as the system name and time. Click Basic Setting >
General Setup in the navigation panel to display the screen as shown.
Figure 58 Basic Setting > General Setup
Chapter 8 Basic Setting
DESCRIPTION
Normal indicates that this fan is functioning above the minimum speed. Error indicates that this
fan is functioning below the minimum speed.
The power supply for each voltage has a sensor that is capable of detecting and reporting if
the voltage falls out of the tolerance range.
This is the current voltage reading.
This field displays the maximum voltage measured at this point.
This field displays the minimum voltage measured at this point.
This field displays the percentage tolerance of the voltage with which the Switch still works.
Normal indicates that the voltage is within an acceptable operating range at this point;
otherwise Error is displayed.
This field lists which power sources can be connected.
Active indicates the Switch is currently operating from the power source. Otherwise, N/A is
displayed.
XS3800-28 User's Guide
84