6.3.1 DHCP Relay Tutorial Introduction
In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a
specific IP address (say 172.16.1.18) to DHCP client A based on the system name, VLAN ID and port
number in the DHCP request. Client A connects to the Switch's port 2 in VLAN 102.
Figure 41 Tutorial: DHCP Relay Scenario
6.3.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
Access the web configurator through the Switch's management port.
1
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the settings to
2
the run-time memory.
Figure 42 Tutorial: Set VLAN Type to 802.1Q
Chapter 6 Tutorials
XS3800-28 User's Guide
67