The Error Disable Screen; Error-Disable Status - ZyXEL Communications XS3800-28 User Manual

33.2 The Error Disable Screen

Use this screen to configure error disable related settings. Click Advanced Application > Errdisable in the
navigation panel to open the following screen.
Figure 272
The following table describes the labels in this screen.
Table 157 Advanced Application > Errdisable
LABEL
Errdisable Status
CPU protection
Errdisable Detect
Errdisable Recovery

33.3 Error-Disable Status

Use this screen to view whether the Switch detected that control packets exceeded the rate limit
configured for a port or a port is disabled according to the feature requirements and what action you
configure, and related information. Click the Click here link next to Errdisable Status in the Advanced
Application > Errdisable screen to display the screen as shown.
Chapter 33 Error Disable
Advanced Application > Errdisable
DESCRIPTION
Click this link to view whether the Switch detected that control packets exceeded the rate
limit configured for a port or a port is disabled according to the feature requirements and
what action you configure, and related information.
Click this link to limit the maximum number of control packets (ARP, BPDU and/or IGMP)
that the Switch can receive or transmit on a port.
Click this link to have the Switch detect whether the control packets exceed the rate limit
configured for a port and configure the action to take once the limit is exceeded.
Click this link to set the Switch to automatically undo an action after the error is gone.
XS3800-28 User's Guide
354