Setting The Display System - UNI-T UTD4000 Series User Manual

Setting the Display System

As shown below, the [ DISPLAY
zone is the function key for the display system.
Figure 2-22 Function key for the sampling
Table 2-1 9 Display menu
Function Menu Setup
YT
Format
XY
Vectors
Type
Points
56
Press the [
menu shown below. You can use this menu to adjust
] key in the control
the display mode.
Explanatory Note
Voltage relative to time (horizontal graticule) is displayed
There are two groups in X-Y display mode. The first group is CH1
for X input and CH2 for Y input. The second group is CH
4
input and CH
Sampling points are linked for display
Sampling points are directly displayed
UTD4000 Four-channel User Manual
DISPLAY ] button to pop out the setup
for Y input.
3
for X