Using the Run Button
There is a button on the top right corner on the front
panel : [
RUN/STOP
]. When this button is pressed and
a green indicator lights up, your oscilloscope is in a
running status. If a red light comes on after pressing
this key, it indicates the unit has stopped operation.
Figure 2-28 RUN/STOP key
76
UTD4000 Four-channel User Manual
:
RUN/STOP
Acquire waveform continuously or stop acquisition.
If you want the oscilloscope to acquire waveform
continuously, press [
RUN/STOP
button again to stop acquisition. You can use this
button to switch between acquiring and stop acquiring
waveform. In the Run mode, a green light comes on
and AUTO appears on the screen. In the STOP mode,
a red light comes on and STOP appears on the
screen.
] once. Press the