Auto Setup - UNI-T UTD4000 Series User Manual

UTD4000 Four-channel User Manual

Auto Setup :

As shown above, Auto Setup can simplify operation.
Press [ AUTO ] and the oscilloscope can automatically
adjust the vertical graticule factor and horizontal time
Table 2- 36 Auto setup
Function Menu
Acquire
Display format
Horizontal position
SEC/DIV
Trigger coupling
Holdoff
Trigger level
Trigger mode
Trigger source
Trigger slope
Trigger type
BW Limit
VOLT/DIV
base range according to the amplitude and frequency
of the waveform, and ensure stable display of the
waveform. When the oscilloscope is in auto setup
mode, the system setup is as follows :
Setup
Normal
YT
Automatically adjusted
Adjust according to signal frequency
DC
Minimum value
Set at 50%
Auto
Automatically adjusted. See notes to Table 2-30 for details
Rising
Edge
Full
Adjust according to amplitude of the signal
77