Configuration of the CPU 410
3.5 PROFINET IO interfaces (X5, X8)
Connectors
The PROFINET interfaces are implemented as Ethernet RJ45 interfaces. Always use RJ45
connectors to hook up devices to a PROFINET interface.
Properties of the PROFINET IO interfaces
Protocols and communication functions
PROFINET IO
According to IEC 61784-2
Open block communication over
S7 communication
PG functions
Port statistics of PN IO devices (SNMP)
Detection of the network topology (LLDP)
Media redundancy (MRP)
Time synchronization in NTP method as client
Time synchronization in SIMATIC method
Time synchronization in pTCP method
You can find further information about the properties of the PROFINET IO interfaces in the
technical specifications of the CPUs in section Technical data (Page 253).
Connection per interface
Version
Media
Transmission rate
46
Conformance Class A und B
TCP
•
UDP
•
ISO-on-TCP
•
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2 x RJ45
Switch with 2 ports
Twisted pair Cat5
10/100 Mbps
Autosensing
Autocrossing
Autonegotiation
CPU 410 Process Automation/CPU 410 SMART
System Manual, 05/2017, A5E31622160-AC